Magpul MAG471-GRY AR-15 Commerical-Spec STR Carbine Stock Gray
**Mouse over image above to zoom any area, or click on image to zoom the entire image.
The Magpul STR (Storage/Type Restricted) is a drop-in replacement
buttstock for AR15/M16 carbines using commercial-spec sized receiver
extension tubes. A storage-capable version of the CTR®, the STR has
improved cheek weld and two water resistant battery tubes on a compact,
reinforced polymer A-frame design.
A shielded operation lever and supplemental friction locking system
prevent accidental operation and minimize excessive stock movement for
enhanced weapon stability and accuracy.*
The STR incorporates two integral sling loops, a reversible push-button
QD sling mount, and a replaceable 0.30" rubber butt-pad which provides
positive shoulder purchase to prevent slippage even with body armor or
modular gear.
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR.
STR, Commercial-Spec (stock configuration)
- Weight: 0.77 lb.
- Weight, w/ Rec. Extension: 1.10 lb.
- Length, Maximum: 7.30 in.
- Width, Maximum: 2.58 in.
- LOP Adjustment Range: 3.80 in.
- LOP, M4 Collapsed: 11.10 in.
- LOP, M4 Extended: 14.90 in.
Features
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP® and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
| Model MAG471GRY |
Condition Factory New |
| Bud's Item # 714012909 |
UPC 873750008998 |
|
Manufacturer Magpul |
The Magpul STR (Storage/Type Restricted) is a drop-in replacement
buttstock for AR15/M16 carbines using commercial-spec sized receiver
extension tubes. A storage-capable version of the CTR®, the STR has
improved cheek weld and two water resistant battery tubes on a compact,
reinforced polymer A-frame design.
A shielded operation lever and supplemental friction locking system
prevent accidental operation and minimize excessive stock movement for
enhanced weapon stability and accuracy.*
The STR incorporates two integral sling loops, a reversible push-button
QD sling mount, and a replaceable 0.30" rubber butt-pad which provides
positive shoulder purchase to prevent slippage even with body armor or
modular gear.
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR.
STR, Commercial-Spec (stock configuration)
- Weight: 0.77 lb.
- Weight, w/ Rec. Extension: 1.10 lb.
- Length, Maximum: 7.30 in.
- Width, Maximum: 2.58 in.
- LOP Adjustment Range: 3.80 in.
- LOP, M4 Collapsed: 11.10 in.
- LOP, M4 Extended: 14.90 in.
Features
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP® and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
Product Videos
Receive Money Saving Offers
Enter your email address to receive our best deals and other store updates.
Catalog
Information
Partners
Copyright © 2003-2024 BudsGunShop.com
All Rights Reserved. (NW2)
