Find Accessories For My Gun x
Join the TEAM! Click for Details
  • All Products
  • All Firearms
  • Handguns
  • Longguns
  • Muzzleloaders
  • Accessories
  • Ammunition
  • Optics/Sights
  • Holsters
  • Magazines
  • Safes
  • Class III

View Past Winners

Ask the Community

  • Pt111 G2millenium Sa/Da, magazine problems

    Asked 03/05/2019 01:21 PM CT
    by unnamed user in Hand Gun

    Taurus G2C 9MM Taurus G2C 9MM
  • I’ve got the older model that has both Sa/Da trigger pull, I’m guessing this is like a regular Da striker fired pistol? Also had problems with the magazines the springs would compress and get hung up and the bullets would fall out or I’d have to tap magazines to get the spring and follower unstuck. Has anybody else had this problem?

    2 Answers

You must log in to ask, or respond to a question
  • 03/05/2019 01:33 PM CT
    by James G - Lifetime Points: 28652 Best
  • Joseph, I have 2 G2C's and an older PT-111 and most of the magazines were ok. The issue was the follower had extra material at the bottom that contacts the magazine walls. I sanded them smooth on the sides and they now work great.

  • 03/05/2019 01:29 PM CT
    by Richard C - Lifetime Points: 1405
  • Nate - I've hear a bit about it. I've had good luck before fixing similar problems by taking the mags apart and cleaning real good (if possible) and spraying the springs and followers with a silicone 'dry' lube (available at the 'box' stores) then reassembling - or if you can;t take them apart, then clean them as best you can and spray a little of the dry lube inside the mag body with the followers depressed. Usually, just a little bit of lubrication eases the problem and really smoothens up the action of the mags. Of course, you could always call Taurus and ask them if they might have had a bad batch of mags. They may be aware of it and possibly replace them. You can call Taurus Customer Service, Monday - Friday - 8:00AM to 10:00PM (EST) at (800) 327-3776. Oh Nate - yes you have a striker fired pistol .. They call it 'DAO"