Find Accessories For My Gun x
Chat now

CIA RI1622-N C39 Sporter 30+1 7.62x39mm 16.5" Reviews

*Please Note!! Many of our pictures are stock photos provided to us by the manufacturer and do not necessarily represent the actual item being purchased. Please verify this picture accurately reflects the product described by the title and description on this page before you place your order.

Product Reviews Ratings Summary
23 Reviews. Average Rating:    4.1 of 5 Stars!
5 stars:
57% (13 of 23)
4 stars:
22% (5 of 23)
3 stars:
9% (2 of 23)
2 stars:
4% (1 of 23)
1 star:
8% (2 of 23)
Displaying 1 to 6 (of 23 reviews) Result Pages:  1  2  3  4   
by Phil E Friday 02 March, 2018
This first generation Century All American Made AK is running great now, with now being the operative word. As received, the gas block was not improperly fitted, it was not fitted at all. I had a single-shot AK-47. I sent it to Century and they repaired it satisfactorily. Shortly thereafter, it simplay failed to function at all. Inspection showed that the rod was not joined to the piston in the usual way. It appeared to be simpy screwed on without the aid of so much as a thread-locking compound Rather than be without the gun again so soon after the first failure, I decided to fix it myself. I ordered the correct malleable rivet from Brownell\'s as Century was unwilling to send me the stone-simple part I needed. After disassembly and a bit of peening on a block, the pin is robust and likely to stay that way. Since then, the gun has run well and shows consistent accuracy capability beyond my optical ability. I was pleased enough with Gen 1 that I bought a Gen 2 from a different dealer and so far, so good.

Rating:     4 of 5 Stars!
by David C Wednesday 17 December, 2014
Put a scope on the rifle and took it to the range. Groups were all over the place. Checked the scope and scope mounts and all were tight. But the quad rail system was loose as a goose. Called Century several times before I got someone who was aware of the problem. After I was told of all the red tape I would have to go through my head was spinning. Decided just to use the iron sights on the rifle and install a bumpski stock. My other AK with a 3rd party quad rail system is very tight and I get 2 inch groups at 50 yards with a Redfield Counterstrike red dot sight. Never going to purchase a Century International Arms product again. Their customer service seems to go the extra mile to give customers a hard time.

Rating:     1 of 5 Stars!
by Francis A Sunday 14 December, 2014
Beautiful rifle, No jams at all totally different than most Century Arms products. Has a little more kick than other Ak's I've shot and the handguard gets pretty uncomfortable when it gets hot. Definitely recommend a vertical "shorty" grip or an AFG. The stock is also different because it is an inch longer than regular AK stocks but overall nice rifle.

Rating:     4 of 5 Stars!
by Adrian S Saturday 04 October, 2014
Absolutely a devastating weapon. I have put around 400-500 rounds through this gun and have had no failures at all. Very reliable gun and as I said.....a devastaing weapon. You want to have a gun to feel secure and protect whats yours? Buy this gun. Buds was great to deal with as always.

Rating:     5 of 5 Stars!
by Bernard P Monday 07 July, 2014
Received my Centurion after 6 weeks on layaway. While I consider myself an avid gun guy, this is only my 2nd AK style rifle (the other is an Zastava M-77 in .308). I got the Centurion after looking over hundreds of different models of AK's from the world over. Different brands and countries of manufacturing really boggle the mind especially when you consider that the design is 67 years old. I consider myself a value shopper, in that I don't really look for cheapest, or the unconditional best (i.e. expensive), but I look for the best price-to-quality ratio I can find that will produce a reliable firearm that I can use as I please for decades. Most of the tolerances are really tight. The stock, the grips, the barrel and gas systems all seem to be 100% in spec. The muzzle brake, however, has a slight wobble to it. Unfortunately, I'm going to have to get a crush washer and make up the slight difference between the landing on the barrel and the base of the brake. I did some comparison with the brake I put on my M77 and the problem is with the threading on the brake not, the threads on the barrel. The brake wobbled on both rifles while my aftermarket replacement was perfect on each. It's in no danger of coming off but I'm either going to replace it or talk to Century about getting it replaced. The Tapco G2 trigger has a little left/right wiggle if enough perpendicular pressure is applied, but the trigger pull itself is outstanding with no creep and crisp break that will surprise you. I don't have a tool to measure the pull, but I guesstimate around 3-4 lbs and it is A LOT cleaner than most mil-spec AR-15 trigger pulls (that I'm much more familiar with). It is also a lot cleaner than my M-77. I did notice when breaking the rifle down for the first time that the trigger spring is not the twisted wire that you see in most of the AK's out of the eastern block nations, but a solid, single strand, spring type like the AR series uses. The safety lever was adequate, but it did not come with the bolt-hold-notch that gun ranges like to see. It's not a big deal since this part is easily replaced for less than $30, it just seems more like oversight than cost cutting on this rifle. Also, the lever that did come on it was not the same finish as the rest of the rifle (I'm guess it was powder coated instead of anodized like the rest of the rifle). Speaking of the finish, it was good, but not great. I could definitely see some wear on the edges from shipping/storage (it ships with 2 awesome Tapco mags and an instruction book, but no case - just a plain padded brown box). I love the extended magazine release. I didn't know I was missing that on my M77 until now! The stock and handguard are both black polymer. The stock feels like it is mounted solidly and being a taller guy (6'4") I appreciate the extra inch they give you with this custom stock. Despite that, it looks and feels cheap. The hard, serrated, buttpad comes off with two phillips screws and reveals the hollowness that is this stock. It's skinny, feels a little small, and would be much better suited with a rubber buttpad instead (not so much for recoil, but general comfort for shooters of all ages). The sling attachment on the stock is also very basic, and would much rather of had something with a QD ability. The polymer handguard also leaves something to be desired. The bottom guard seems sturdy enough but is uncomfortable to hold because of the picatinny rail that is utterly useless because it's polymer. Furthermore, the top polymer guard is only slightly loose, but that's still too loose to trust any type of optic (since that is the only place you can put one on it out of the box since it's missing a side mount). The front handguard is going to be the first piece that I replace. The polymer pistol grip seems adequate enough for a stock grip, but I'll probably replace with a rubberized Hogue at some point. I have not had a chance to shoot it yet but my initial impressions give me no reason to doubt it's ability to perform as expected. Overall, for $630, I feel I got my moneys worth. I love the fact that it's American made, and has most of the niceties that I wanted. The few complaints that I did notice, and dictate above, I consider minor as I plan to customize the rifle to my liking anyway. A better handguard, pistol grip, a notched safety lever, an optic and a few extra tapco magazines and I think she'll be a Grade-A piece of hardware. Buds layaway helped me a lot and as with all the new firearms I purchase from them I got the lifetime warranty for $30. I hope I'll never need it, but we'll see once the time comes.

Rating:     4 of 5 Stars!
by derek w Thursday 27 March, 2014
For a milled receiver AK for under $700 its great, best deal you will find. Feels really good. I Only have three minor issues The front sight seems to not be same size on either side by just a hair. At first I thought the whole front sight was off but after close review its centered perfectly its just not even.The right side of the ring is longer then the other by just a hair. The second minor issue is the safety lever is very hard to take off safety, it really does not want to move. Third problem for me is the gun did not come with a cleaning kit for taking the firing pen out and stuff. I thought it would come with it !!! P.S I would prefer the wood stock set to the plastic so The classic C39 would be better if you can get your hands on it but if not this you can buy and then buy the wood stock set

Rating:     4 of 5 Stars!
Displaying 1 to 6 (of 23 reviews) Result Pages:  1  2  3  4   
Write Review