**Mouse over image above to zoom any area, or click on image to zoom the entire image.
- Barrel Features: 16" 4140 Chrome Moly Steel Barrel with .308 A2 Flash Hider
- Rate-of-Twist: 1:10"
- Upper: A3 Style Flattop Upper with Hard Coat Anodized Teflon Coated Black
- Lower: Billet Hard Coat Anodized Lower
- Sights: None/Optics Ready
- Forend: Carbine Length GlacierGuards
- Weight: 8.3 lb
|Metal Finish||Mossy Oak|
|Overall Length||41 1/2"|
|Drop||1 1/8" @ Comb & 2 1/4" @ Heel|
|Gauge||12 GA / 20 GA|
|Drop||1.5" @ Comb & 2.375" @ Heel|
|Caliber||308 Winchester/7.62 NATO|
|Overall Length||32.5" - 36.5"|
|Caliber||223 Remington / 300 AAC Blackout / 7.62x39mm|
|Trigger||Geissele SSA-E 2-Stage Trigger|
|Drop||.5" @ Comb & .625" @ Heel|
|Metal Finish||Polished Blue|
|Gauge||20 & 28 Gauge|
|Overall Length||32.5" - 33.75"|
|Trigger||Geissele SSA Two Stage|
|Safety||No Manual Safety|
|Drop||1 1/8" @ Comb & 2 1/4" @ Heel|
Questions & Answers
the only was is to Join team buds if you were planning to do a layaway then joining team buds is a easier decision because a 90 day layaway will cost $25 in fees and a Team buds membership is $29.95 and gets you free layaway along with the other benefits https://www.budsgunshop.com/teambuds.phpSee 2 more answers |
Michael, yes Sir, you will need this riser rail : https://www.budsgunshop.com/product_info.php/products_id/711020027/qds+gas+block+rail+riserSee 1 more answer |
Q: THINKING OF USING ONE FOR HUNTING WHITETAILS OUT OF A TREE STAND AND NEED A SAFETY THAT IS QUIET. WHAT DO YOU THINK ? THANKS. RON
Ronald, I have this model rifle (as well as the Panther in 5.56mm model). The safety is more or less silent. You can "feel" it with you bare finger (no gloves) but otherwise does not make any noise. If you are worried about sound, make sure you charge the camber with a round (and put safety on of course) well before you reach the area where you intend to hunt. The sound of charging a round is relatively loud (at least to deer and alike) so it should be done well away from the hunting area. BTW, the DPMS is a good choice for an AR-10 type rifle. Lots of aftermarket customization products for it. You might also like the Diamondback AR-10 as well. Also an excellent, economical choice in the 7.62 category.See 2 more answers |
Q: I know this is an 16" barrel, so my question is, will it fit an 7" front guard? Same as my 16" Windom Weaponry R16m4?
Jerek - you can install pretty much whatever length hand guard you want, provided you replace the gas block with a low profile gas block, if you are installing a longer rail. And, Jerek - on a .308 rifle, a 1:10 twist rate barrel is pretty much what you need for any commercially available 308 bullet available. 308's are different than the smaller .223. I'm sure Michael was thinking of 5.56/.223 when he mentioned the 1:7 or 1:8 twist rate barrels.See 5 more answers |
Jerek - This has a mil-spec buffer tube sir, and will accept mil-spec stocks. Very good rifle too - I got one right after they were released and it was a great firearm. Even better now ... and priced at just about half of what I had to pay back then.See 2 more answers |
Michael, The upper receiver is milled from a 7029 T6 aircraft grade aluminum construction. The lower receiver, on the other hand, has been extruded from a 6061-T6 aluminum which is also hardy and durable. To boost the durability of both the upper and the lower, they feature a hard-coat anodized finish. This secures the receivers from scratch and corrosion together with other harsh conditions.See 1 more answer |
- Show More Questions
Out of Stock Products
Find Accessories For My Gun
Have a Question?
As a whole our 4+ million customer's know more about firearms than we do. If you have a general question about a product we highly recommend that you first try out our customer Q&A feature. More often than not you will receive multiple answers to your question in minutes.
Receive Money Saving Offers
Enter your email address to receive our best deals and other store updates.
Copyright © 2003-2022 BudsGunShop.com
All Rights Reserved. (NW3)