will it hold a 30 round mag?

Name: DAN DDM4 V7 5.56 16 DWG 10 CA
Brand: Daniel Defense
SKU: 415000918
Availability: OutOfStock

Yes you can but in CA It would be Illegal with a bullet button you need a tool to depress the magazine release but it will still work

Daniel - ARs in CA have to be modified .. have to be equipped with a device that makes the 10 round magazine a 'fixed' magazine - called a bullet button, or other CA approved device. The mag remains attached to the firearm and loads either from the side or the top. . One can not simply take out a 10 round mag and put in a 30 round mag, especially since possession of a 30 round mag in CA is a felony offense.

It is a CA compliant rifle, and magazines over 10 rounds are now illegal in CA, to the question is really moot. . If you an legally have a 30 round mag, you live somewhere other than CA .. and can have a 30 round capacity AR from the start.

Daniel, yes Sir it will. Most manufacturers including Daniel Defense make firearm packages that have 10rd magazines so their firearms can also be sold in state that have magazine capacity restrictions. The firearms are exactly the same but just have 10rd mags included. The firearms will also accept any standard capacity magazines just fine.

BudsGunShop.com uses cookies to ensure you get the best experience. Details can be found in our Privacy Notice.

Got It!

Locate FFL

Trade With Gurney

Suggest Edit

DAN DDM4 V7 5.56 16 DWG 10 CA - 16" Barrel, 10 Rounds

Reviews| 1 Questions & Answers

Model: 02-128-13192055

Condition: Factory New

Bud's Item Number: 415000918

UPC: 815604018852

MFG: Daniel Defense

Questions & Answers (1) Reviews 0 out of 5

**Mouse over image above to zoom any area, or click on image to zoom the entire image.

DANIEL DEFENSE
DAN DDM4 V7 5.56mm NATO 16 Inch Threaded Government Profile Barrel 1/2x28 TPI M-LOK Daniel Defense MFR 15 Cerakote Elite Deep Woods Green Finish 10 Round - CA Compliant
DDM4 V7
Mil-Spec lower receiver with enhanced flared magazine well and rear receiver QD swivel attachment point. CNC machined. Type III hard coat anodized. Mil-Spec upper receiver with indexing marks and M4 feed ramps. CNC machined. Type III hard coat anodized. Chrome Moly Vanadium steel, cold hammer forged threaded barrel (1/2x28 TPI), 1:7 twist, government profile, mid-length gas system, chrome lined, MP tested and Mil-Spec heavy phosphate coated. Pinned low profile gas block CNC machined of 4140 hardened steel and Mil-Spec heavy phosphate coating, mid-length, direct impingement. Daniel Defense Flash Suppressor, salt bath Nitride finished. M16 profile bolt carrier group is Mil-Spec MP Tested, chrome lined, Properly Staked Gas Key. H buffer. No sights. Daniel Defense MFR XS 15.0 handguard is CNC machined of 6061-T6 Aluminum, M-LOK attachment. Six position Mil-Spec 7075-T6 Aluminum receiver extension. Daniel Defense buttstock and pistol grip, glass filled polymer with Soft Touch Overmolding. DD magazine. Includes Daniel Defense Full-Latch Impact Plastic Case. Made in the USA.


Barrel Length	16
Caliber-Gauge	.223 REM.
Capacity	10
Finish	Cerakote Elite Deep Woods Green

Made in the USA	Made in the USA
Specific Caliber	5.56mm NATO
Tactical	Tactical

Product Information

Barrel Length

Capacity

Product Information

Barrel Length

9.05

Capacity

7+1

Product Information

Barrel Length

Capacity

OUT OF STOCK

Ask the Community

Retail Store Availability

In-Store Purchase Only
Lexington, KY	Not in store
Greenville, KY	Not in store
Sevierville, TN	Not in store

SHARE
THIS

DAN DDM4 V7 5.56 16 DWG 10 CA

Model 02-128-13192055	Condition Factory New
Bud's Item # 415000918	UPC 815604018852
Manufacturer Daniel Defense

DANIEL DEFENSE
DAN DDM4 V7 5.56mm NATO 16 Inch Threaded Government Profile Barrel 1/2x28 TPI M-LOK Daniel Defense MFR 15 Cerakote Elite Deep Woods Green Finish 10 Round - CA Compliant
DDM4 V7
Mil-Spec lower receiver with enhanced flared magazine well and rear receiver QD swivel attachment point. CNC machined. Type III hard coat anodized. Mil-Spec upper receiver with indexing marks and M4 feed ramps. CNC machined. Type III hard coat anodized. Chrome Moly Vanadium steel, cold hammer forged threaded barrel (1/2x28 TPI), 1:7 twist, government profile, mid-length gas system, chrome lined, MP tested and Mil-Spec heavy phosphate coated. Pinned low profile gas block CNC machined of 4140 hardened steel and Mil-Spec heavy phosphate coating, mid-length, direct impingement. Daniel Defense Flash Suppressor, salt bath Nitride finished. M16 profile bolt carrier group is Mil-Spec MP Tested, chrome lined, Properly Staked Gas Key. H buffer. No sights. Daniel Defense MFR XS 15.0 handguard is CNC machined of 6061-T6 Aluminum, M-LOK attachment. Six position Mil-Spec 7075-T6 Aluminum receiver extension. Daniel Defense buttstock and pistol grip, glass filled polymer with Soft Touch Overmolding. DD magazine. Includes Daniel Defense Full-Latch Impact Plastic Case. Made in the USA.


Barrel Length	16
Caliber-Gauge	.223 REM.
Capacity	10
Finish	Cerakote Elite Deep Woods Green

Made in the USA	Made in the USA
Specific Caliber	5.56mm NATO
Tactical	Tactical

Operators Manual

There are no reviews on this product yet. Be the first to write one: Write Review

Questions & Answers

Q: will it hold a 30 round mag?
Answered

Asked 03/23/2019 02:39 by Daniel B

A:

Yes you can but in CA It would be Illegal with a bullet button you need a tool to depress the magazine release but it will still work
See 3 more answers |

4,556,993 Customers Since 2003

1,832 Currently Online

Receive Money Saving Offers

Enter your email address to receive our best deals and other store updates.

Conditions of Use • Privacy Notice

DAN DDM4 V7 5.56 16 DWG 10 CA - 16" Barrel, 10 Rounds

Questions & Answers

Q: will it hold a 30 round mag?

Receive Money Saving Offers

Catalog

Information

Partners

Recommended For You

Recently Viewed Products

Shopping Cart

Wish List

Please log in to view your wish list.

DAN DDM4 V7 5.56 16 DWG 10 CA - 16" Barrel, 10 Rounds

Locate FFL

FFL Search

Search Results

Dealer Info

Modal title

Suggest Edit

Description

Product Documentation

(0 Reviews)

Questions & Answers (1 Questions)

Questions & Answers

Q: will it hold a 30 round mag?

Product Videos

Receive Money Saving Offers

Catalog

Information

Partners

Recommended For You

Recently Viewed Products

Shopping Cart

Wish List

Please log in to view your wish list.