Windham Weaponry R20GVTA4S-7 Govt Rifle SA 223 Rem/5.56 NATO

Questions & Answers

• Q: Does this configuration "Windham govt 20" have a single- or two-stage trigger?

  • Answered
  • Asked 03/05/2022 07:51 by Rick C

  A:

  Rick, this gun has a standard mil-spec single stage trigger. Have a great day!

  See 3 more answers |
• Q: What is the length of pull?

  • Answered
  • Asked 11/30/2021 23:11 by Grady D

  A:

  Grady, it should be the same as the M16 A1 (same Gov't stock) : Length of Pull: 12.875 inches ------ https://www.fulton-armory.com/buttstockassemblygroupa1newblack.aspx

  See 1 more answer |
• Q: How many mags does it come with?

  • Answered
  • Asked 11/18/2021 21:33 by Floyd V

  A:

  Floyd, this comes with 1 magazine. Have a great day!

  See 3 more answers |
• Q: Is the barrel of this rifle hammer forged or nitride treated?

  • Answered
  • Asked 11/18/2021 09:15 by Paul S

  A:

  Paul, this rifle has a 20" Chrome Lined Chrome Moly Vanadium Barrel (Forged). The Barrel Material is 4150 Chrome Moly Vanadium 11595E Steel w. M4 Feed Ramps.

  See 1 more answer |
• Q: Is this shippable to CA?

  • Answered
  • Asked 08/22/2021 16:41 by Kent M

  A:

  Kent, this can't be shipped to CA, too many banned features. Pistol grip and flash hider. budsgunshop.com/feeds/state_reg/california_restrictions.pdf

  See 3 more answers |
• Q: Does this have the single or double heat shield in the handguard? Manufacturer's website doesn't specify.

  • Answered
  • Asked 07/09/2019 15:13 by Muhsin M

  A:

  Muhsin, There is a single aluminum heat shield under this firearms hand guard.

  See 1 more answer |
• Q: Will my old m16 bayonet fit? Brought it home from Vietnam.

  • Answered
  • Asked 03/15/2019 19:25 by ken w

  A:

  Other answers are correct, additionally though, bayonets should work on almost any 20" barrels with rifle-length gas systems (such as the one you're looking at), 16" barrels with mid-length gas systems, and 14.5" barrels with carbine length gas systems unless any of them have non-standard muzzle devices that don't allow it to fit. The usual issue is on 16" barrels that have a carbine length gas system making the flash hider too far forward for the bayonet cross guard to sit on it properly but that isn't the case with this gun. Thank you for your service!

  See 3 more answers |
• Q: Is this a right handed rifle?

  • Answered
  • Asked 06/10/2018 18:28 by Paul W

  A:

  Yes, this is a "Right Hand" model rifle Paul. (Specifications and Features): - 5.56 NATO (accepts .223 Remington) - Semi automatic direct gas impingement - 20" chrome lined chrome moly vanadium barrel - 30 rounds capacity - Carpenter 158 steel bolt - Forged 7075-T6 aircraft aluminum receivers - Rifle length fiberglass handguard with aluminum heat shield - A2 flash hider - Sling swivels - A4 dual aperture rear sight with windage and elevation adjustment - A2 fixed stock - Overall length 39.5" - Weight (without magazine) 7.7 lbs - Black).

  See 1 more answer |
• Q: Like the title asks, does this rifle use mil-spec parts, like sights and so forth?

  • Answered
  • Asked 04/30/2018 06:58 by Brian H

  A:

  Yes, those parts are Mil-Spec Brian. The only part I would ask Windham about is the buffer tube (I have seen both Commercial and Mil-Spec) available. they should be able to verify this at Customer Service: 855-808-1888.

  See 1 more answer |
• Q: Can the handguards be switched to the triangular guards from the Vietnam era?

  • Answered
  • Asked 03/22/2018 00:45 by Joseph C

  A:

  Hi Joseph, I did more research. The triangular handguards will work. Here's how -- https://www.windhamweaponry.com/hand-guard-cap/

  See 5 more answers |
• Show More Questions