ATI.c Ruger 10/22 Fiberforce Stock
**Mouse over image above to zoom any area, or click on image to zoom the entire image.
- Weighs Only 26 oz!
- Ventilated Forearm and Handguard
- Sure-Grip Textured Pad for Improved Grip When Shooting
- Built-In Cheekrest
- 3M Soft Touch Cheekrest Pad for Improved Comfort When Shooting
- Sling Swivel Studs
- Dowel Sling Mount
- Easy Drop-In Installation
- Weatherproof
- DuPont® Extreme Temperature Glass Reinforced Polymer
- Manufactured in the USA
- Limited Lifetime Warranty
Fits Most Ruger® 10/22®
Note: Swivel Studs Accept any Standard Sling Swivel
| Product Information | |
| Type | Stock |
| Firearm Type | Rifle |
| Firearm Model | Ruger 10/22 |
| Material | Polymer |
| Finish | Black |
| Features | Thumbhole/Grip |
- Weighs Only 26 oz!
- Ventilated Forearm and Handguard
- Sure-Grip Textured Pad for Improved Grip When Shooting
- Built-In Cheekrest
- 3M Soft Touch Cheekrest Pad for Improved Comfort When Shooting
- Sling Swivel Studs
- Dowel Sling Mount
- Easy Drop-In Installation
- Weatherproof
- DuPont® Extreme Temperature Glass Reinforced Polymer
- Manufactured in the USA
- Limited Lifetime Warranty
Fits Most Ruger® 10/22®
Note: Swivel Studs Accept any Standard Sling Swivel
on
06/20/2026
These stocks are great! I really like the pistol grip. It installed with no issues, in a few minutes. This is the 2nd one i have purchased . I would recomend these to anyone that doesnt like the standard plastic stocks.
on
08/22/2023
made my ten22 so nice my co worker bought it for his kids from me
on
05/28/2023
Poor quality. Stock does not fit properly. Would require quite a bit of force to get the action/trigger to seat properly so the barrel will fit in the forearm of the stock. Even if it is forced into the stock, the mounting hole for the take down screw will not line up. It would require modification to the stock by removing material to get assembly. Also, there is a sharp seam that needs to be sanded smooth the entire length of the stock. Edges are sharp and need the same treatment. I'd expect something of this quality to cost maybe $20. I'm reluctant to modify this to fit. I will try to get a return from Bud's.
on
03/30/2022
It looks cool, but it's cheap and it shows. Very poor fit and it took a bit of work to get the receiver in. I had to cut a lot of material out of it to get it to work. It was very loose in some areas and then very tight in others. When I finally got it together it looked good though and people at the range liked it and were asking what it was and how much it cost and couldn't believe the price. It is very light as well and I did some cutting off of everything I thought I could get away with to make it lighter. I've since retired it for something better, but I can always use it again if I feel like it especially because of all the work I had to do on it.
on
01/24/2022
This fiberforce stock is much lighter than the original, it's a perfect fit. The comb is at just the right height and angle. The product is superb and i didnt have to spend alot.
on
03/28/2021
Was a bit disappointed in fit and finish of product. Had to file down numerous places from the molding process that should have been done by the manufacturer. Works ok, glad it was only 35 bucks.
on
03/18/2021
Inexpensive upgrade for the Ruger 10/22 so the kids can drag it through the woods.
on
02/26/2021
Was really excited when I ordered this, as i already had a build in mind that I wanted to set this up with. Unfortunately I couldn’t use some of my rifles base components, and the slot that holds the receiver is a bit too wide. Thus I had to shim mine to fit a bit better. Moreover for the price it’s not a bad stock just may need some hand fitting is all.
on
02/26/2021
Was really excited when I ordered this, as i already had a build in mind that I wanted to set this up with. Unfortunately I couldn’t use some of my rifles base components, and the slot that holds the receiver is a bit too wide. Thus I had to shim mine to fit a bit better. Moreover for the price it’s not a bad stock just may need some hand fitting is all.
on
02/26/2021
Was really excited when I ordered this, as i already had a build in mind that I wanted to set this up with. Unfortunately I couldn’t use some of my rifles base components, and the slot that holds the receiver is a bit too wide. Thus I had to shim mine to fit a bit better. Moreover for the price it’s not a bad stock just may need some hand fitting is all.
Product Videos
Loading Videos
Receive Money Saving Offers
Enter your email address to receive our best deals and other store updates.
Catalog
Handguns,
Rifles,
Shotguns,
Muzzleloaders,
Ammunition,
Accessories,
Optics/Sights,
Holsters,
Magazines,
NFA Items
Information
FAQ,
The Shooting Bench Blog,
How to Buy a Gun Online,
How to Purchase NFA (Class III),
Don't Lie for the Other Guy,
Why Buy From Bud's?,
Payment Options/Cancellation Fees,
Shipping & Returns,
State Restrictions,
Warranty,
Team Bud's,
Recent Reviews,
Accessibility Policy
Partners
Copyright © 2003-2026 BudsGunShop.com
All Rights Reserved. (NW2)
