Arsenal Firearms SAM7K-01 Milled Receiver 7.62x39mm Blue/Black Pistol

A: The barrel is 10.5". This means the muzzle device is probably pinned. (On the 106UR Pistol, the threads on the front sight block are turned down and the muzzle device pressed onto the front sight block.) If the same is true of the SAM7K-01, then removing the pinned muzzle device and replacing it with something more functional becomes somewhat of a pain in the butt, as there isn't enough left on the front sight block. You would then either be forced to turn down the front sight block and thread the barrel itself, or replace the front sight block in its entirety (no small undertaking).

A: Yes, this pistol Accepts all 7.62x39 AK-47 double-stack magazines and drums Phil. 30rd, 20rd, Drums etc.

A: Phil, it will accept any AK magazine or drum.

A: Hi Phil, Yes, it will accept any AK magazine or drum.

A: Please click the green box stating it as the best answer. We are rated on our answers and are just volunteers, not Buds employees. You can choose more then one Thank you!

A: Yes, this pistol Accepts all 7.62x39 AK-47 double-stack magazines and drums . 30rd, 20rd, Drums etc.

A: Yes, this pistol Accepts all 7.62x39 AK-47 double-stack magazines and drums . 30rd, 20rd, Drums etc.

A: Hi Manuel, I would contact Midwest Industries for fitment questions as they will have test fitted many AK Pistols and should be able to direct you to a compatible hand guard at 262-896-6780 Customer Service Hours: Mon–Fri 8am–3:30pm.

A: I would contact Midwest Industries for fitment questions as they will have test fitted many AK Pistols and should be able to direct you to a compatible hand guard at 262-896-6780 Customer Service Hours: Mon–Fri 8am–3:30pm.

A: It would be difficult Lee as the AK Pistol design has an enclosed rear receiver that would need to be opened up to mount any type of brace.

A: Possible yes, theres a few braces that come with AK adapters. checkout "Sb Tactical SOB47 AK Pistol Stabilizing Brace".

A: here is a nice set up https://www.thefirearmblog.com/blog/2018/09/19/new-stinger47-ak-pistol-brace-adapter-kgb-llc/

A: while it can most likely be removed I would not recommend it for safety and liability reasons

A: Andre, yes. Remove pistol grip, that way the left side selector has more movement. Rotate the right side safety up past the safe notch. Pull it out a bit and you will see if clear the frame on the left side Pull back the spring. Now the safety will come in 2 parts, remove the right side, then rotate the left side and pull it out through the grip hole. Hope this helps you Sir.