Charter Arms Pitbull Compact .40 S&W Blacknitride Process Revolver
Capacity: 5 · Barrel Length: 2.3 inches
Specifications
Grip Rubber
Action Double Action
Finish Blacknitride Process
Sights Standard Sights
Weight 20 ounces
Capacity 5
Grip Safety No
Optic Ready No
Barrel Length 2.3 inches
Manual Safety No
Overall Length 7.25 inches
Trigger Safety No
Caliber / Gauge .40 S&W
Threaded Barrel No
Ambidextrous Safety No
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to WWW.P65WARNINGS.CA.GOV
Description
Product Overview
The Charter Arms Pitbull Model 64020 is a compact five-shot revolver chambered in .40 S&W. Its patented dual-coil spring assembly in the extractor retains rimless cartridges in each cylinder chamber, eliminating the need for moon clips while simplifying spent-case ejection and reloading. The revolver features a durable Blacknitride Process finish, a large frame, a 2.3-inch barrel, and a full rubber grip for a secure hold. The exposed standard hammer supports both double-action and single-action operation, while the 3-dot sight setup provides a clear, familiar aiming reference.
Key Features
- Chambered in .40 S&W for compatibility with a widely available rimless pistol cartridge
- Five-shot cylinder provides a compact carry configuration
- Dual-coil extractor system retains cartridges without moon clips
- Blacknitride Process finish increases surface hardness and helps resist friction, wear, and scratches
- Full rubber grip improves control and handling comfort
- 3-dot sights provide a straightforward aiming reference
The Charter Arms Pitbull combines revolver simplicity with a purpose-built system for reliable .40 S&W loading and ejection.
4.0 | 6 Reviews
Free and Fast Shipping to the Lower 48 States.
- SKU:
- 64020
- UPC:
- 678958640205
- BUDS ID:
- 3221
Compatible Ammo
Customer Reviews
4.0 out of 5
6 total reviews
Share your experience
Let others know what you have thought about this item.
Latest Reviews
James D.
6 years ago
Verified Purchaser
When Charter Arms...
When Charter Arms first released the Pitbull in .40 S&W about 9 years ago I couldn't wait to buy one. Unfortunately, I had some problems with it and eventually sold it. When I saw they now have a black nitride version I wanted to try it out. I managed to get my hands on one and have put about 100 rounds through it. The finish is even more beautiful in person that I expected. It had some scuffing at wear points, but they can't be seen when it is closed up. I tried to find out what metal the frame is made from, but no one seems to know. I was told by another owner that it is aluminum, but that seems to be only half true. The gun weighs 20.5 ounces, like the stainless steel version, and is magnetic, so I believe it is a 300 or 400 series stainless. The trigger guard does appear to be aluminum, as is a few small parts. \\r\ \\r\ On my old stainless steel version the inside of the cylinder was very rough, as if they made a first cut, but never finished it. I was happy to see the fit and finished on the black nitride version was much better. However, I did find the cylinder took a fair amount of effort to open and close. I cleaned and oiled the gun and went to the range. The bullets were so difficult to get in and out that it took me 15 minutes to shoot 20 rounds. I cleaned and oiled the gun again, this time paying special attention to the ejector rod, including two small holes just inside the extractor star. I also oiled the tabs that hold the cases in place and worked a bullet in and out of each chamber at least 20 times. Then I open and closed the cylinder over and over. Everything loosened up and it now functions much better. \\r\ \\r\ My next big problem, as with the original gun, was far too many light primer strikes. I was using old range ammo, so I bought some high quality self defense ammo and fired ten rounds without an issue. Apparently this one is just as picky about ammo as the stainless steel version I used to have. \\r\ \\r\ My overall feelings are still luck warm. I don't like triggers with grooves, so I will probably buy leather gloves to shoot this with. I don't like guns that require certain ammo to function correctly. The jury is still out on weather or not it is reliable enough for a carry weapon, and I'm not completely convinced it is accurate, but that could also be the ammo. It is not a Ruger, or Smith and Wesson, to be sure. On the other hand, I do enjoy shooting it. The finish is nice, and seems durable. It is easy to clean. You also pay a premium to shoot a rimless cartridge from a revolver without moon clips. \\r\ \\r\ There is enough to like about this gun that I will give it a chance, but if this is your first, and only, gun, then the Pitbull may not be your best choice. Look for something in a 357 Magnum or 38 Special P.
Andrew O.
7 years ago
Verified Purchaser
Great dealing with 2...
Great dealing with 2 great companies. Buds and Charter Arms. Love the ease of use, and revolver with auto ammo for shooting up here in the Midwestern Winter. Thanks Buds and Charter for your great service and innovational Revolver. Merry Christmas to all.
Brian B.
8 years ago
Verified Purchaser
shot good , was to...
shot good , was to much for my old hands. Buds was awesome as usual.
Guaranteed Lowest Prices
All purchases are backed by our Bud's Price Protection: Protect every purchase up to $100, free of charge!
Questions & Answers
No questions found
Retail Availability
Bud's Gun Shop - Lexington, KY
1105 Industry Road, Lexington, KY 40505
Bud's Gun Shop - Sevierville, TN
2270 Two Rivers Blvd, Sevierville, TN 37876
Uncle Lee's - Greenville, KY
820 Main St, Greenville, KY 42345
