Daniel Defense DDM4 V7 California Compliant .223 Remington 5.56 NATO Blue/Black Rifle

A: yes standard AR 15 30 round mags will fit and work just fine I recommend MagPul P-Mags

A: Vidal, yes. Standard AR magazines and drums will work just fine. 5rd, 10rd, 20rd, 30rd, 40rd, and up to drums will work.

A: This rifle comes with a DD made milspec trigger with a pull weight of about 6-7 pounds. Triggers are super easy to switch out though so you could easily pull the milspec trigger and put in a Timney, Rise armament, or Giselle or whatever.

A: 0:50 seconds in he talks briefly about the milspec trigger. https://youtu.be/WrY9ctvhrx8 --------------- The SSA-E trigger you asked about, is around a $200 trigger and is in stock at buds. But is not included on this rifle. -------------------------------- https://www.budsgunshop.com/product_info.php/products_id/714018986/geissele+spr+semi-auto+enhncd+ssa-e

A: Preston, this just has a standard milspec trigger. You can purchase a jp Enterprise reduced power trigger spring kit for roughly $10. It's a spring kit you can use with any standard milspec trigger to reduce the pull down to roughly 3-3.5 pounds. I have ars with good drop in triggers and I have ones that I've polished the trigger on and added the spring kit and they're just as good as expensive drop in triggers. Hope this helps

A: Preston, the model with the Geissele Automatics Super Dynamic 3 Gun Trigger is currently out of stock. https://www.budsgunshop.com/product_info.php/products_id/18792/daniel+defense+16541055+ddm4+v7+pro+semi-automatic+.223+remington .....in stock here >>> https://www.riflegear.com/p-9979-daniel-defense-m4v7-pro-m-lok-rifle-factory-ca-maglock.aspx ....Have a great day!

A: Hi Alex, this has a fixed magazine, so it is NJ legal. The Daniel Defense California compliant design prevents the magazine release button from being engaged while fully assembled, locking the magazine into the receiver. To release the magazine from the rifle, the shooter will be required separate the upper from the lower by pulling on an extended (rear) takedown pin with an attached cord to make the process easier. The only NJ compliant DD AR15's are the CA compliant models with a fixed magazine. https://www.budsgunshop.com/feeds/state_reg/new_jersey_restrictions.pdf

A: As Ed C. mentioned, this is NJ legal due to the magazine being fixed/locked in place.

A: Hi Alex and welcome. Yes Sir, this is NJ legal as the "fixed magazine" excludes it from one of the restrictions that would normally bar this in NJ. To change magazine, simply pop the rear take-down pin, swivel the lower from the upper, change the mag and close and re-pin. Cheers, stay safe and enjoy!