Henry Repeating Arms H001TMRP Small Game Large Loop Octagon .22 WMR Blue Rifle

A: If you find a lower price at another vendor, submit a "Price match" request to Buds. Buds will either match the price or send you their "Best" price. Remember to also consider Buds free shipping in the overall total. (If price is matched Buds will place the item in your cart at that price/no obligation to purchase).

A: No, 22mags casing is longer than 22lr and that can cause issues. I definitely wouldnt try to shoot 22lr out of a 22mag. Sorry but hope this helps.

A: No 22 mag rounds are fatter than 22lr ammo and shooting a 22lr in a 22mag chamber can cause the case to burst and send hot gasses and metal into you face

A: Josh T its the diameter that is the real problem not the length

A: here is a good article on it "Therefore, if you place a .22 LR in a .22 WMR chamber, it will be a sloppy fit. If the LR cartridge is actually fired in the WMR chamber, the case may rupture and vent high pressure gases and particulates rearward, through the breechface. There is a significant risk of injury if you fire .22 LR ammunition in a .22 WMR chamber!" https://revolverguy.com/psa-shooting-22-long-rifle-in-22-magnum-cylinders/#:~:text=It%20is%20NOT%20safe%20to%20shoot%20.22%20LR,LR%20in%20the%20.22%20WMR%20chamber.%20RTFM%21%20Why%3F

A: Gary, unfortunately no 22 Magnum can safely fire 22lr rounds. This is the reason 2 cylinders come with combo revolvers : https://www.budsgunshop.com/product_info.php/products_id/28489/north+american+arms+(naa)+swc+sidewinder+22m22lr+combo+single+22+wmr++15+5+ro

A: John, this Henry 22 mag has a 3/8-inch grooved receiver. So any dovetail scope rings will fit. What size would depend on the scope you plan to use. If you post again with the type of scope you wish to use can recommend rings for you. Hope this helps.

A: Hi John and welcome. A conversion mount 3/8 inch to Picatinny is the most versatile mounting option. You would want a light and low profile mounting solution for the lightest setup : https://www.amazon.com/Profile-Dovetail-Picatinny-Adaptor-Heavy/dp/B0763RD75H --------- Cheers and stay safe!

A: John, this gun has a 3/8" Grooved Dovetail Receiver, so you would need Ringmounts for 3/8" Groove in either 1" or 30mm, depending on the scope. For more versatility. I went with a dovetail to pic rail adapter >>> amazon.com/gp/product/B01ABW7GS0/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 This allows you to use any scope base/rings that will mount to a picatinny rail. It also gives you the option of going with a red dot scope. Stay safe & have a great day!

A: Hi Robert and welcome. No Sir. This model has an octagonal barrel that is not threaded. Cheers and stay safe!

A: Not with this model, it does not have a Threaded barrel.

A: Hi Robert, Threading an octagon barrel is not a huge problem for a good gunsmith, however with most tube fed rifles the tube must be also be shortened. However, a golden boy has other obstacles besides the octagon barrel. 1) not enough barrel between muzzle and front sight. Usually one would cut barrel back being dovetail, thread, then cut new dovetail. 2) can't cut barrel back because barrel is only about 1/2" longer than feed tube. 3) not good suppressor host because without modification, you will have to remove suppressor everytime you reload. . Stay safe & have a great day!