Henry Repeating Arms Big Boy Octagon Barrel .357 Mag/.38 Special Rifle

A: Yes you can. This is rated for 357 Magnum which is more powerful than 38 Special plus P. Factory 357/38 will be no problem.

A: Yes and it will likely function better with the +p then the standard .38s.

A: To get the most out of the rifle you can take up reloading and use load data for a rifle in 357 instead of a pistol. The slower burning powder will push on the projectile for a longer period of time. You can go to hodgdon's website to view load data or flip through a reloading catalog.

A: yes you can with no problems

A: Hi Michael yes you can no problem. 357/38 will work!

A: Hi Bruce yes it will handle it no problem

A: Yes it will most rifles are ok with the buffalo bore rounds

A: The 357 heavy loads are listed as being ok from the Marlin Levers so should be fine in the Henry's. I would still seek advice from Henry on this so as not to risk life or limb at Henry Product Info - Tele: 201-858-4400

A: Company president Anthony Imperato states that the Big Boy can handle any loadings within the SAAMI pressure limit (36,000 PSI for the .44 Magnum). If you're a glutton for shooting expensive ammo, Buffalo Bore makes Big Boy-safe .44 Magnums that deliver nearly 2,000 lb-ft of muzzle energy. That said, their very heaviest .44s are not recommended; the slow-twist barrel may not properly stabilize the heaviest .44 Magnum bullets. But the Big Boy [reportedly] does fine with bullets up to and including 270 grains.

A: Buffalo bore states that this ammo is safe in any steel frame revolver so it will be fine in a henry big boy rifle. the henry is much stronger that some steel revolvers

A: If you feel an answer is helpful please click the green box stating it as the best answer. We are rated on our answers and are just volunteers. You can choose more then one Thank you!

A: Yes this gun will handle the buffalo bore rounds of ammo. This is a modern firearm and therefore will handle any loads that are currently on the market, no matter the manufacturer. The only time you have to be careful with heavy loads is in older firearms and this is a brand new gun, so again yes it will handle and shoot them just fine. Hope this helps.

A: No it isn't NJ compliant. It must be 6 rounds or less. https://www.budsgunshop.com/catalog/feeds/state_reg/new_jersey_restrictions.pdf

A: Please click the green box stating it as the best answer. We are rated on our answers and are just volunteers, not Buds employees. You can choose more then one Thank you!

A: the way I read it is that it would be NJ compliant as what I read it only restricts semi auto rifles not lever actions I would give a local FFL holder a call to be 100% sure

A: I have and the will work just fine

A: Hi Victor, the PPU ammunition will work however, I would suggest a more modern "Full Metal Jacket" load that will cut down on barrel fouling such as : https://www.budsgunshop.com/catalog/product_info.php/cPath/656_2081_10000566/products_id/714013500/ARMSCOR%2038SPL%20158GR%20FMJ%2050/1000/ or https://www.budsgunshop.com/catalog/product_info.php/cPath/656_2081_10000566/products_id/12750/CapArms%20M038N158B%20Target%20Match%2038%20Special%20158%20GR%20Round%20Nose%20Flat%20Point%2050%20Bx/%202/ or https://www.budsgunshop.com/catalog/product_info.php/cPath/656_2081_10000566/products_id/34024/Fiocchi%2038%20Special%20158%20Grain%20Full%20Metal%20Jacket/

A: the H006M that you listed is Ca compliant along with all these henry rifles see link (Rifles of any caliber with tubular magazines (e.g. lever action) may have a capacity of more than 10 rounds (Cal. Penal Code S.16740).) Link https://www.budsgunshop.com/catalog/index.php?cPath=2084_1153_1797&filter_id=275

A: Yes there are plenty available here Bob : https://www.budsgunshop.com/catalog/index.php?cPath=2084_1153_1797&filter_id=275

A: the H006M that you listed is Ca compliant along with all these henry rifles see link (Rifles of any caliber with tubular magazines (e.g. lever action) may have a capacity of more than 10 rounds (Cal. Penal Code S.16740).) Link budsgunshop.com/catalog/index.php?cPath=2084_1153_1797&filter_id=275

A: Hi Bob, Here are the Ca compliant models - https://www.budsgunshop.com/catalog/index.php?cPath=2084_1153_1797&filter_id=275

A: Alan, it most likely will be fine if you are not near a coastal location. There are firearm anti rust/tarnish bags you could use for extra protection as well. Details here : https://www.zerustproducts.com/products/firearms-ammo-weapons/vci-gun-storage-bags/

A: Alan, HenryPride.com has all the products you need to keep your Golden Boy shiny and tarnish free. The "Big Boy All Purpose Metal Polish" will keep it shiny forever. Take a look. Henry has everything you need on that site.

A: Alan - like anything else, the Golden Boys require some care. They are 'clear coated' to help prevent tarnish. Here is a video on the care of Henry rifles. https://www.youtube.com/watch?v=2sWFxuX2BkU