Mossberg Patriot Walnut .308 Win Blue/Black Rifle

A: Yes. the NATO can be fired from the .308, not the other way around though. And yes, steel cased ammo will fire but, you may possibly run into some feed/extraction issues. Hope that helps!

A: Manufacturer: Mossberg Model: Patriot Action: Bolt Caliber: 308 Win Caliber: 762NATO Barrel Length: 22" Finish/Color: Blue Grips/Stock: Walnut Type of Barrel: Fluted Capacity: 5Rd Manufacturer Part #: 27861

A: .308 is loaded a bit hotter and uses thinner brass than 7.62 nato so you should be fine. That being said, Mossberg rifles tend to have sticky bolts, and shooting steel case really isn't going to help with that.

A: The 308 win and 7.62 nato are actually loaded to the same pressures and velocities. Both shoot a 150 grain bullet at 2750 so pressure must be virtually the same. The differences really lie in the system used to measure the pressure. The headspace is the real difference in the two cartridges. The nato round is safe to fire in the 308 chamber but the 308 may not be safe to fire in the nato chamber because if the chamber is cut at the max for headspace of the nato round the thinner brass of the 308 may cause it to split. Your rifle is safe to use with either ammo. The steel ammo can be very lightly oiled to help it extract reliably.

A: Michael, I would contact MDT who makes magazines for many brand rifles : https://mdttac.com/us_en/blog/post/mdt-releases-10-round-308-metal-magazine/

A: Michael - none available for the Patriot as far as I can find. Mossberg designed this as a low cost hunting rifle, and for that purpose the five round capacity was deemed sufficient. As it isn't really a 'plinker' or a 'defense' oriented rifle, I doubt the mag manufacturers are standing in line to invent a 10 round magazine for this rifle. https://www.mossberg.com/store/mossberg-patriot-bolt-action-centerfire-magazine-standard-short-action-95347.html

A: Rob, yes Sir the Mossberg Patriot has has machined aluminum bedding pillars.for stability.and the barrel is free-floated in the stock.

A: Mark, yes sir, this is drilled and tapped and already has a scope mount. You would just have to purchase a scope and scope rings and mount it. Hope this helps.