Ruger Precision Rifle Folding Stock .223 Remington 5.56 NATO Blue/Black Rifle

A: This is chambered to use 223/5.56 (the only difference is about 5 grains of powder and a slightly longer leade in the barrel), Yes, the mag will fit.

A: First answer, the caliber it's chambered in, will fire .223 or 5.56. both of these rounds are 22 caliber, meaning the bullet is the same diameter as a .22 long rifle, but is a heavier grain and has more powder. Second answer, yes, as long as the magazine is in a .223 or 5.56 chamber, it will fit in your rifle. Hope that helps.

A: If the barrel is a 5.56 s 223 then you can shoot either ammo. If it was a 223 then it would not be advised to shoot factory 5.56 ammo in it. This is because the chamber in the 223 is slighter smaller and will not allow the case to expand as much as the 5.56 chamber. The 5.56 ammo is also more abundant and cheaper on the norm.

A: 223 vs 5.56 I'll answer as short as possible. The throat or leade on the 5.56 is slightly longer on 5.56 x 45 round. Reason, military production runs and use. When a rifle is in less perfect operating conditions and can't or doesn't get cleaned the looser tolerances may keep it running. The 5.56 x 45 round has looser tolerances on overall length, bullet seating depth and powder charge. If all the variables are on the maximum then you could have blown out primers that could ruin a day at the range. The 223 has tighter tolerances in both chamber and cartridge dimension. The 223 wylde chamber solves the problem by increasing the throat dimension while still keeping the tight chamber. Yep, the magazine should fit just fine.

A: The UPC code is of a mid/late 2016 manufacture so I would say it's safe to assume Gen 1. Shame that Buds probably won't know Edward.

A: Hi Edward, this is a Gen 1 model.

A: I disagree the model number 18019 crosses to the current Gen 2 http://ruger.com/products/precisionRifle/specSheets/18019.html even in your question you state that it has the short-action handguard in the BUDS listing it states ADDL INFO:Ruger Short-Action Handguard which would be the Gen 2 I searched the UPC at other sites and they all showed it with the Gen 2 improvements The new enhanced version was released in May 2016 http://www.thefirearmblog.com/blog/2016/05/12/new-rugers-enhanced-precision-rifle/

A: Thanks for the information Iem. This will help a lot of Community members that are interested in the RPR line of rifles. https://www.ruger.com/products/precisionRifle/models.html

A: Hi Lem, Thanks for the information

A: Michel, yes it is CA compliant since this Rifle is a "Bolt Action" and not "Semi-Auto" Rifle. https://www.budsgunshop.com/catalog/feeds/state_reg/california_restrictions.pdf

A: Yes its CA compliant because it is a bolt action it is CA compliant https://www.budsgunshop.com/catalog/feeds/state_reg/california_restrictions.pdf

A: Jess, This rifle only has rail along the top of the receiver, the top of the handguard doesn't have any. Only certain models come with the swivel stud, this doesn't appear to have it. Thank you!

A: Jessica, only on top of the rifle receiver. You would need KeyMod Picatinny Rail Sections to add accessories or a bipod : https://www.budsgunshop.com/catalog/search.php?q=keymod+rail+section&type=

A: The only rail is on top of the receiver. It is 20 MOA. It comes with attachments for sling and bipod.