Girsan High Power MC P35 PI 9mm Black Pistol
Specifications
Grip Black plastic
Action Single Action
Finish Black
Sights Standard Sights
Capacity 15+1
Grip Safety No
Optic Ready No
Barrel Length 3.88 inches
Caliber / Gauge 9mm
Manual Safety Yes
Trigger Safety No
Threaded Barrel No
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to WWW.P65WARNINGS.CA.GOV
Description
Product Overview
Built in the classic John Browning Hi-Power design tradition, the Girsan High Power MC P35 PI is a 9mm, steel-frame semi-automatic pistol with an external hammer and a 3.88-inch barrel for quick, consistent follow-up shots. It features fixed iron sights with a windage-drift adjustable rear and a dovetail front sight, plus ambidextrous manual safety and magazine disconnect safety for added control during use.
Key Features
- 3.88-inch barrel for quick second-shot reset timing
- 15+1 staggered-column magazine capacity
- Black plastic grips with a secure hold
- Ambidextrous manual thumb safety and magazine disconnect safety
- Fixed iron sights with drift-adjustable windage rear and dovetail front
- 9mm semi-automatic pistol built on a steel frame and slide
If you want a modern Hi-Power-style handgun with classic handling and iron-sight configuration, the Girsan High Power MC P35 PI is ready for the range.
4.0 | 6 Reviews
- SKU:
- 390440
- UPC:
- 741566905773
- BUDS ID:
- 148264
Free and Fast Shipping.
Compatible Ammo
Customers Also Bought
Customer Reviews
4.0 out of 5
6 total reviews
Share your experience
Let others know what you have thought about this item.
Latest Reviews
Pierre S.
1 year ago
Verified Purchaser
I owned this pistol...
I owned this pistol for about a month and traded it in. Honestly, the quality was not what I hoped for. After the first range session, (100 rounds), a roll pin that held the right side safety backed out, which was immediately concerning. The pin that held the magazine disconnect in the trigger also started to work loose and ceased to be flush. And while I could either address these issues or submit a warranty claim, the gun itself isn't that great. The trigger is heavy a gritty, the hammer takes two hands. I personally wouldn't recommend this gun.
Sanford S.
2 years ago
Verified Purchaser
Girsan. Has a way to...
Girsan. Has a way to go to make this a favorite. Shoots better than expected. Taking it down to clean is a bear
Tay M.
2 years ago
Verified Purchaser
The gun looks good,...
The gun looks good, and was received well packaged and well oiled. I have only fired about 25 rounds so far, with zero issues, but have done no accuracy testing. Because it has a shortened barrel and recoil spring assembly, it is very difficult to field strip the barrel from the slide. The factory instructions were of no help. They are the same ones for the full size pistol, which is constructed differently. I finally clamped the complete side assembly upside down in a padded vise, and passed a tool (pin punch) through the recoil spring guide slide stop hole. I then compressed the recoil spring toward the muzzle as far as possible. When fully compressed I was able to lift the barrel out of the slide and then relax the recoil spring slowly and remove it along with the guide. NOTE: This is opposite the way it is done on a full size Hi Power. If there is a better/easier way to do it without tools, I would love to hear it. NOTE: The recoil spring is extra strong due to it's shorter length, and the guide is full length unlike the short one on a full size HP. The instructions should have addressed this. The trigger pull out of the box is terrible, even AFTER removing the magazine disconnect safety I weighed it at 8.5 pounds gritty with a lot of creep, which is why I have not yet done any accuracy testing. I removed the sear lever from the slide and polished it. This is a cast part and was quite rough in places. Side note: It is a Mark III system, with firing pin block which kind of surprised me. I reassembled the pistol and noticed all the trigger creep was gone, and the trigger weight had dropped to 7.5 pounds. I plan to do more, one step at a time to get the trigger pull weight down, but for the price I paid, I am not going to complain. I do not like the three dot sight set up, but that is personal preference. I had to modify the plastic left side grip panel by removing some material around the magazine release in order to better reach it. The molded in thumb rest was interfering. I also removed some material around the top of the left side panel by the manual safety lever in order to better reach it. Both steps were simple to do, and looked fine after. I am trying to keep my bargain priced pistol a bargain by not running out and buying a ton of new custom parts right off the bat. Bud's price was the best around, and their service was excellent as always.
Guaranteed Lowest Prices
All purchases are backed by our Bud's Price Protection: Protect every purchase up to $100, free of charge!
Questions & Answers
No questions found
Retail Availability
Bud's Gun Shop - Lexington, KY
1105 Industry Road, Lexington, KY 40505
Bud's Gun Shop - Sevierville, TN
2270 Two Rivers Blvd, Sevierville, TN 37876
Uncle Lee's - Greenville, KY
820 Main St, Greenville, KY 42345
