Daniel Defense M4A1 M4A1 RIS II 5.56 NATO Blue/Black Rifle

A: It only comes with an ambi safety and mag release NO ambi bolt catch. https://danieldefense.com/m4a1.html

A: Ryan, this comes with an ambidextrous safety and charging handle but that's it. You can easily switch out the magazine release for ambidextrous. You can also purchase a bad lever bolt catch and make this 100% ambidextrous. Hope this helps.

A: As mentioned below. Only has ambidextrous Safety & Mag release.

A: Ryan, true ambidextrous safety and magazine release only. Cheers and stay safe! I would highly recommend the Magpul BAD Lever : https://www.brownells.com/rifle-parts/bolt-parts/bolt-catch-parts/bolt-catches/ar-15-m16-b-a-d-lever--prod29341.aspx?avad=278253_f271a75c1&aid=221565&utm_medium=affiliate&utm_source=Avantlink&utm_content=NA&utm_campaign=221565

A: Hi David, no tax stamp required. The flash suppressor is permanently attached to the barrel, bringing the overall length to the required 16". (When the muzzle device is permanently attached, it counts toward the barrel length). Stay safe & have a great day!

A: no tax stamp required because the flash suppressor in not removable it makes the barrel length over the legal minimum of 16 inches

A: Hi David and welcome. No Sir due to the permanently attached Pinned and Welded Daniel Defense Flash Suppressor giving it a legal 16-inch overall length. Cheers and stay safe!

A: yes just screw off the flash hider and screw on the suppressor

A: Hi Reyes and welcome. No Sir. This model has a Barrel Length of 14.50" with a Pinned & Welded Flash Hider to bring the overall length to 16 inches to make it legal. Cheers, stay safe and enjoy!

A: Hi Reyes, no sir, the flash suppressor is pinned & welded and cannot be removed. This is done to bring the overall length of the barrel from 14.5" to the required 16". Stay safe & have a great day!

A: The upc is for a brown rifle. Stay safe & have a great day!

A: Hi and welcome. Brown by manufacturer upc. Complete Specifications here: MATERIALS & CONSTRUCTION<br />MILSPEC+ Finish<br />LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized<br />UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized<br />BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 14.5″ M4 Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate coated<br />GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement<br />MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished<br />BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key<br />BUFFER: H Buffer<br />SIGHTS: Sold Separately