Customer Reviews for ATI.c Ruger 10/22 Fiberforce Stock
Buy Now
08/22/2023
on
made my ten22 so nice my co worker bought it for his kids from me
05/28/2023
on
Poor quality. Stock does not fit properly. Would require quite a bit of force to get the action/trigger to seat properly so the barrel will fit in the forearm of the stock. Even if it is forced into the stock, the mounting hole for the take down screw will not line up. It would require modification to the stock by removing material to get assembly. Also, there is a sharp seam that needs to be sanded smooth the entire length of the stock. Edges are sharp and need the same treatment. I'd expect something of this quality to cost maybe $20. I'm reluctant to modify this to fit. I will try to get a return from Bud's.
03/30/2022
on
It looks cool, but it's cheap and it shows. Very poor fit and it took a bit of work to get the receiver in. I had to cut a lot of material out of it to get it to work. It was very loose in some areas and then very tight in others. When I finally got it together it looked good though and people at the range liked it and were asking what it was and how much it cost and couldn't believe the price. It is very light as well and I did some cutting off of everything I thought I could get away with to make it lighter. I've since retired it for something better, but I can always use it again if I feel like it especially because of all the work I had to do on it.
01/24/2022
on
This fiberforce stock is much lighter than the original, it's a perfect fit. The comb is at just the right height and angle. The product is superb and i didnt have to spend alot.
03/28/2021
on
Was a bit disappointed in fit and finish of product. Had to file down numerous places from the molding process that should have been done by the manufacturer. Works ok, glad it was only 35 bucks.
03/18/2021
on
Inexpensive upgrade for the Ruger 10/22 so the kids can drag it through the woods.
02/26/2021
on
Was really excited when I ordered this, as i already had a build in mind that I wanted to set this up with. Unfortunately I couldn’t use some of my rifles base components, and the slot that holds the receiver is a bit too wide. Thus I had to shim mine to fit a bit better. Moreover for the price it’s not a bad stock just may need some hand fitting is all.
02/26/2021
on
Was really excited when I ordered this, as i already had a build in mind that I wanted to set this up with. Unfortunately I couldn’t use some of my rifles base components, and the slot that holds the receiver is a bit too wide. Thus I had to shim mine to fit a bit better. Moreover for the price it’s not a bad stock just may need some hand fitting is all.
02/26/2021
on
Was really excited when I ordered this, as i already had a build in mind that I wanted to set this up with. Unfortunately I couldn’t use some of my rifles base components, and the slot that holds the receiver is a bit too wide. Thus I had to shim mine to fit a bit better. Moreover for the price it’s not a bad stock just may need some hand fitting is all.
10/25/2020
on
This stock was very easy to install, it required zero gunsmithing. I had it on in about 5 minutes. Some people said their stock required filing but mine did not. Maybe they have older guns that have slightly different tolerances. It popped on so easy for me. I have a new Ruger - the one Bud's has for sale with the gray stock; maybe this is why it went on so easily for me. Definitely worth the money! Adding this stock was great for me as I am a hot mess when shooting - left eyed and right handed. I can loop my thumb through the stock from the bottom and get a tight grip on the pistol grip, adding increased accuracy. It weighs the same as the plastic stock the gun came with. I am extremely pleased and would recommend it.
07/30/2020
on
Very lightweight stock, but strong and comfortable.
I love the pistol grip design, but wish the butt was a tad wider.
As others have noted, there's some finish work required. The mold flashing needed sanding, and I had to cut away some material to fit the top vent guard to my '77 vintage 10/22.
But, for the price, all good.
I love the pistol grip design, but wish the butt was a tad wider.
As others have noted, there's some finish work required. The mold flashing needed sanding, and I had to cut away some material to fit the top vent guard to my '77 vintage 10/22.
But, for the price, all good.
07/24/2020
on
Made my old rifle cool again. It is ergonomic. Fit and finish is a little rough. Some sandpaper and some drilling was necessary.
04/17/2019
on
Very light weight. I got this stock to teach the young ones to shoot. They can easily hold up the rifle now its still alittle long. Thought it was going to be flimsy but it's not. The seam from the injection mold is sharp so alittle bit of sanding or careful clean up with a utility knife is needed
03/26/2019
on
This products great, looks fantastic. Definitely looks like a Draganov, fits River 10/22 perfectly!
08/17/2017
on
The stock turned out great and fit perfectly