Forward Controls Optic Platform for Glock MOS
Model:
OPF-G, RMR
Condition:
Factory New
Bud's Item Number:
718009278
UPC:
686162347902
**Mouse over image above to zoom any area, or click on image to zoom the entire image.
OPF-G, RMR (Optics Platform, GLOCK, for RMR) is a GLOCK MOS Adapter
Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on
GLOCK Gen 4 and Gen 5 slides, G17, G19, G20, G21 G34, G35, G41, G45, G47
(width 25mm/1 inch.) and G40 that uses Set 02. GLOCK's OEM MOS plate's
width matches that of the slide, but OPF-G, RMR is already wider to
fully support the RMR, thus it is compatible with all MOS equipped GLOCK
slides.
We like the GLOCK MOS concept,
even if we find the factory MOS adapter plates could use some help.
Standards, commonality, availability of parts are all good things.
Heretofore, users have had to send in their slides to be milled to
accept mini red dot sights, or opt for 3rd party optics ready slides.
The time it takes to send in the slides to be milled, and varying
quality of the milling work and optics ready slides notwithstanding,
there was a lack a standard regarding the sight height, it'd be a
coincidence if two slides milled by two different shops share the same
sight height. GLOCK 's MOS may not sit as low as some, but in our
opinion, what MOS offers more than makes up for it, namely a uniform
sight height, ease of installation, parts commonality and availability.
OPF-G,
RMR is a collaboration with a USMC combat veteran and former USMC
Shooting Team head coach, Tom Shields. We used GLOCK 's MOS adapter
plates as a basis, and designed our version of what we think it should
and can be.
OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives:
1. Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
2. Eliminate the need to use an additional sealer plate.
3. Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
4. Adapter plate is to be machined in steel.
OPF-G,
RMR accomplishes all of the goals outlined above. Machined in 4140
steel, and black nitrided, OPF-G, RMR's thickness is unchanged from
that of the GLOCK MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights.
OPF-RMR
is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what
GLOCK MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10
key and a VC3 packet.
Weight: 0.83oz
Plate to slide torque value: 13in/lb
Sight to plate torque value: 13in/lb
Proudly designed and made in USA.